products
Safe, Simple & COst effective
Fully adaptable to all well configurations.
At Wamco, we have the safest, simplest & most cost effective method of re-spacing/tagging the Down-Hole pump. Period.
The WAMCO Polished Rod Spacer System consists of three main parts:
Extruded Aluminum Alloy Spacers
Handling Tool
sized from 2" to 18". (Custom sizes are available upon request). WAMCO Spacers are made from an Aluminum Alloy; offering a lightweight and safer alternative to some “homemade“ solutions.
Rod size specific for added safety.
Used to place & remove the Spacers on the carrier Bar, from the ground - Safely.
The spacer handling tool is adjustable,facilitating the installation and removal of spacers from the ground on most pumping units.
Suitcase Adapter Plates
Used together with a Spacer, or Spacers to form a Suitcase/Standoff, used to safely support the Rod String. No danger of "kick outs". No clamp damage to Polished Rod - no damage to Packings.
Fully adaptable to all well configurations.
key benefits
Some of the benefits of using the WAMCO Polished Rod Spacer System, along with the WAMCO Suitcase/standoff:
​
• No climbing – no clamps moved – no falls – no fingers lost.
• No expensive access ladders, trailers, ramps necessary.
• All work is done with feet on the GROUND.
• The average time to re-space or tap is 8 – 12 minutes! Completed in total safety.
• Less damage to the Polished Rod than current methods.
• ROI is normally obtained the first time the equipment is used. No long term payback.
• Reduce your liability to injury claims with the use of the proven WAMCO method.
• Total control over the fine tune spacing of the Down-Hole Pump.
• Quickly & easily adjust the Spacing during Hot Oil processes and changing fluid levels.
• The use of the WAMCO Polished Rod Spacer System encourages Operators/Service Crews to Tag/Tap less often, reducing the damage to the Down-Hole equipment & Rods.
• Made in Canada
​
WAMCO parts have all been fully Engineered.
Once installed, WAMCO Polished Rod Spacers enable your Crews to re-space the Down hole Pump, to enhance production, or tap/tag bottom to release gas bubbles &/or trash from the pump, easily and SAFELY!